How to make onions at home - instructions and materials

A bit of history

It is not known for certain who first began to use the ability of elastic branches of some wood species for throwing arrows. However, the use of bows significantly increased the chances of the ancient hunters in defeating prey and warriors in clashes with the enemy. At first, this throwing weapon was made by simply bending a suitable branch, but over time its design became more complicated and improved. The pinnacle of development was the compound bow, when elastic elements were made separately from the handle and were joined together in the assembly process. The process of making good combat throwing weapons is complicated, and it is not easy to reproduce it at home, but using modern tools and materials allows for quite good results.how to make onions at home

The device onions and raw materials for its manufacture

The device of this type of throwing weapon is quite simple; it consists of three parts: elastic elements, a handle and a bowstring. Making onions at home is possible in several ways:

  1. From a relatively straight and elastic branch.
  2. The logs of such woods as birch, elm, oak, maple, hazel or ash. It should be borne in mind that the industrial production board is unsuitable for these purposes.
  3. From plastic, for example, from skis.

The first option can be done in just a few minutes, but the firing range, as well as accuracy, will be unsatisfactory. The latter method is more complicated and will require skills to work with polymeric materials. The second option is the longest, but with the right performance, the result will be worth the time spent.

Procurement of materials and drying

Descriptions of how to make onions at home, there are many, but in all, without exception, emphasis is placed on the use of high-quality workpiece. The wood is cut in winter at a negative temperature and dried indoors. The log should have a diameter of not less than 12-15 cm., And the length is equal to the arm span of the arrow plus 0.5 m. For possible cracking and deformation. Sections are stained with oil paint, and the bark is not removed from the workpiece. Drying takes about three months necessarily upright.

Workpiece preparation

Almost all descriptions of how to make a bow at home, there are recommendations to use only those tools that could be used in those times. However, the use of modern circular saw does not harm the future product. Naturally, it is necessary to strictly observe all necessary security measures. The thickness of the board must be at least 30-35 mm. and have no defects of development and damage, it is desirable that the fibrous structure is uniform and parallel to the longitudinal axis. how to make onions at home

Roughing

The question of how to make onions at home is not an easy one. In addition to high-quality materials, the skills of working with wood will also be required. Cut a frontal profile of the weapon from the existing board according to a special template. This uses a plane and a well-sharpened knife, if possible, the shape of the shoulders should be the same, the tolerances are a few tenths of a millimeter. On the handle in the upper part is cut out for the boom. The cross section of elastic elements is variable with a gradual decrease from the middle to the edges.

Bowstring and bowing

In many instructions on how to make onions at home, it is recommended to use bullish veins and tendons in the process of working on the product. First, it is rather difficult to obtain these materials, and secondly, it is also not easy to process them. As a bowstring, you can use a cord of high-quality polymeric materials with a diameter of approximately 2-3 mm. At the ends of the loop knit, and in the middle of the tube is put on PVC under the heel of the arrow. The process of bending the workpiece is made after steaming, there are different ways of soaking herbs in the decoction, but they are not always effective.Making onions at home

Arrow Production and Throwing Arms

Having received a detailed description of how to make a bow at home, the master still has to learn how to make arrows. The diameter of this product is about 8 mm., And the shape of its cross section is closer to the ideal cylinder, the higher will be the ballistic properties. The tip of a triangular shape with a strip, a width equal to the diameter of the boom, is attached to the kerf with the help of glue and threads. In the back, the plumage is glued to stabilize in flight, and the center of gravity must be moved forward.Bowstring is worn immediately before shooting and removed at the end. Special gloves and leggings are worn to protect the fingers and forearm. When conducting firing it is necessary to comply with security measures and in any case not to direct weapons on people and animals.

Related news

How to make onions at home - instructions and materials image, picture, imagery


How to make onions at home - instructions and materials 60


How to make onions at home - instructions and materials 28


How to make onions at home - instructions and materials 35


How to make onions at home - instructions and materials 39


How to make onions at home - instructions and materials 2


How to make onions at home - instructions and materials 60


How to make onions at home - instructions and materials 67


How to make onions at home - instructions and materials 38


How to make onions at home - instructions and materials 14


How to make onions at home - instructions and materials 69