Fly fishing gear for beginners. Fly fishing. Fishing
To some extent, fishing with fly fishing can be considered classic, since its process reflects the basic fundamentals of fishing equipment. For all the time of its existence, this method has gone through a lot of transformations, which, however, did not prevent to preserve its spirit and aesthetics by now. Actually, for this professionals and love fly fishing, as effective catching large fish there are many other techniques. The most difficult in mastering this technique is to learn the basics, since most of the materials on this topic are devoted to the subtleties for specialists. Knowledge of what should be properly assembled fly fishing gear for beginners will provide an understanding of the nuances of catching. But there are a lot of positive points in fishing with fly fishing - this is a set of quite accessible and familiar components.
The composition of tackle for fly fishing
The success of all fishing depends on how well the gear is assembled.It is important not only to choose the right parts, but also to group them into a single ensemble. It is necessary to begin with analysis of the list of the elements demanded for a fly-fishing. So, the following components will be included:
- Form(directly rod). The basis to which the most demands on power, strength, length and other qualities.
- Coil. It should be comfortable and functional.
- Cord. Responsible, albeit auxiliary part, connecting the different elements of which will consist of fly fishing gear for beginners in finished form.
- Underbrush with bait.
Additional components may also be required. They can also prevent fishermen from beginning, but there should be some idea of this area. In particular, it can be connectors-carbines, floats and leashes. They simplify the task of the fisherman, although they require skillful handling.
For inexperienced hands, it is desirable to prefer a rod of moderate hardness. To understand this characteristic will help the stiffness classes. For fly-fishing at the first stage it is worth using the 6-7 class model. The rigidity of this form will be enough to work with a mass of fish from 200 g to 4 kg. Too hard rod should not be used for various reasons.Firstly, the tackle for fly fishing of moderate softness makes it possible to feel the cord more sharply when casting, and secondly, a large fish in the process of pulling out can break off a thin leash.
Also, when choosing a rod, it is necessary to take into account the number of knees - it varies from 2 to 4. Two-legged models are stronger, and rods with a large number of connections, respectively, are not as reliable, although they increase the casting distance. The form itself, from which fly fishing gear for beginners can be made, is made of different materials. The most in demand are fiberglass, bamboo and carbon fiber. If funds allow, it is better to choose models of carbon fiber, which have an optimal balance of strength and flexibility.
Coil selection and setup
For fly fishing it is worth considering three variants of the coils: regular, automatic and multiplicative. The first time is to try catching with conventional models, and then move on to more complex versions. But it is important that the coil be equipped with an adjustable brake. With this accessory, fly fishing gear for beginners will make the process of catching effective and convenient.For the rest, there are no special requirements for the coil, however, it is recommended that it have a carrier, without which it will be necessary to form a cord-backing. Many budgetary models are deprived of this opportunity, therefore this nuance should be taken into account.
Fly fishing cord
It is desirable to acquire a cord together with a rod - it is important that these two components fit together. So, if you purchase a form of grade 6, then the cord must match it. It should be understood that in this case the class reflects the mass that the wiring withstands for the first 10 m. Thus, the 7th class corresponds to a weight of 12 g, which corresponds to the weight of a small spoon. Especially fly fishing gear for beginners should not have rods and cord, which differ in marking. The fact is that a weak cord will not provide sufficient sensitivity, and too heavy will create a risk of breakage of the blank.
There are two more criteria for choosing this element - buoyancy and color. Beginners are recommended floating cords, as they are easier to cast. And the color is to stop the choice on light versions - for example, fly fishing with a white cord will provide a disguise effect, which is important when fishing for some types of predators.
Leash or undergrowth
In the undergrowth of the undergrowth, a fishing line of small diameter may appear.For inexperienced anglers it is advisable to use options with a taper of 0.2-0.5 mm. A thick ending will need to be tied to the cord, and a thin one to the front sight. The length of the lead is approximately 2.6 m. In case of divergence of this parameter with the length of the blank, the line should be shortened. In order to use fishing gear with strong winds, short undergrowths should be done in advance. But, since it will not be possible to adjust the fishing line of the same size for different conditions, you should initially have several options of different diameters.
The process of assembling gear for the most part involves tying knots, but before that you need to perform a backing. It is a lining to ensure the winding of the cord on the coil. In answering the question of how to assemble fly fishing gear with the correct backing, it is necessary to note the importance of calculating its length. Typically, these data are obtained from marking on the coils. But there is another way to find out this parameter. To do this, you need to wind the cord on the coil, and then carry out the backing. You can stop at the moment when the edge will be about 5 mm.Further winding is performed in the reverse order.
The installation of fly fishing gear with a string also depends on the presence of a leskederzhaya in the coil. Actually, the backing-cord technique is performed in cases where this addition is not in the drum. At first, the backing itself may seem unnecessary, but in the process of catching large fish it will act as a softening winding.
Fly fishing knots
When the backing is completed, it is necessary to lay out all the components in a prominent place, preparing the nippers or scissors. This tool is required when working with nodes to trim excess. There are many schemes in which knots are formed for fly-fishing gear, but if you plan to catch large fish, then it makes no sense to do without them by acquiring a knotless leash. For self-mating, the “Arbor” scheme is usually used, which is performed as follows:
- At the end of the backing, the usual knot is knitted, and then it is firmly tightened.
- The cord is pulled through the coil so that its end with the initial knot is located at the bottom of the spool.
- The same ending is tied up with a standard knot.
- The new knot is also strongly tightened, as well as the first, and then it is necessary to make a loop on the spool, sipping on the second one.
It is better to train with overlap with wet and dry front sights. In terms of sizes, the most convenient numbers are from 3 to 6. Too small types of lures, less than 3 numbers should be excluded immediately. To experience the cast, flies and do not need. You can restrict the use of a cotton swab. This is especially important for the reason that flies wear out in a short time of use. Accordingly, if the fishing tackle is supplied with such a bait, then immediately after use it must be dried. A special approach is needed to feathers, which should be straightened with tweezers and in hot water. If possible, it does not hurt to process them with steam. In order not to spoil the fly at first fishing, it is better to acquire high-quality models from the universal line - they are most resistant to different fishing conditions.
Fly fishing technique
The first impression from the finished tackle for fly fishing may not be the best. Elements seem to be unsuitable for each other, and the rod is inconvenient to handle.But this is the first time, until the angler has mastered the technique by which fly fishing with backing is performed. Begin to study it with a cast. To do this, grab the handle with the fixation of the cord in his left hand. Further, the characteristic movements are performed with the rod back and forth so that the cord maneuvers in the air. In parallel with this action is made and pulling up. The meaning of such scope is that they will allow you to make the most distant shot.